Xvive U2 Guitar Wireless System
The U2 Wireless Guitar System from Xvive is the most compact and easy way of freeing yourself from the usual spaghetti tangle of cables that is the bane of every musician.
This Wireless Guitar System can be used for Electric guitar and Bass guitar, as well as electric acoustic instruments with an EQ/Pickup such as guitars, basses, mandolins, ukuleles etc.
This item is NOT Suitable for electric acoustic instruments with an Active Pickup, or Microphone Pickup or Condensor. If you are unsure if your instrument is compatible, please contact us for advice.
Comprising of two simple and small 1/4 jack connectors that act as transmitter and receiver, the U2 is ideal for stage, home and studio use and can also connect via Bluetooth to your favourite devices, using 24 bit resolution to capture every detail in real time - uncompressed, natural, clean tone with no delay at a range of up to 100ft/30m.
It uses 2.4 GHz frequency and uses WI-FI spectrum. It is digital and the sound would be as though you are using a cable. You can use up to 4 units at a time. To eliminate any possibility of interference from other devices using the 2.4 GHz frequency, we recommend the Xvive U2 wireless system not be placed within 1m of another U2 Wireless system, and more than 3m away from any WI-FI devices such as Internet Routers, Portable Hot Spots etc.
Featuring a rechargeable lithium battery with approximately 5 hour life at full charge.
Includes a transmitter and a receiver.
Charging cable is included.
The Tech Specs
Suitable For: Electric guitar, Bass guitar and Electric Acoustic instruments with an EQ with Pickup.
Range: Up to 100ft/30 metre line-of-sight transmission range
Delay time: 6 ms
Frequency Response: 10Hz-20kHz
Channels: 6 compatible (Legal for use in Australia and New Zealand)
Resolution: 24-bit Delta Sigma, 2.4GHz broadcast
A/D conversion: 24-bit low-noise system
Dynamic Range: 105dB
Play Time: Approximately 5 hours with rechargeable lithium battery
Recharge Time: Approximately 2 hours when flat
Input/Output: Side-mounted 1/4-inch Jack connector ins and outs on receiver/transmitter